Steps for Daily Maintenance of The Rice Huller

The reducer of the Rice Huller(LIANGGONG)

complete equipment is an important part of the equipment. The reducer is strictly prohibited to run without oil. After the first operation for 300 hours, the interior of the cleaning is replaced with new oil, and then the oil is changed every 2,500 hours. This phenomenon is The same must be implemented carefully.

The rice processed by the rice huller machine should maintain a certain degree of dryness, and the general moisture content should not exceed 14% & 15%. When the moisture content of rice is too high, the rice grains are broken, affecting the quality of rice, and the power consumption is also increasing.

Pay attention to check if there are nails, stones and other debris in the rice, so as not to enter the whitening chamber to cause blockage or damage to the rice sieve.

Before starting the machine, check the machine parts such as rice screen, rice knife and roller core to see if the bolts and nuts are tight.

Turn the drum before turning on the rice huller complete equipment to see if there is a jam.

When starting up, first run the air to the normal speed, then pour the rice into the hopper, and pay attention to the operation of the rice huller.

After each day of work, check the rice huller and supporting facilities and find out the problems in time to ensure that the rice mill is always in good condition.

Click Rice Grader
to learn about more information.

Sign In or Register to comment.